Gulf Auto Zone


With nearly half of its items  custom made, this Bubbletop has the truly two-toned twisted testosterone to take home the trophies. Chevy aficionados may have heard of the term bespoke. It essentially means made “in house,” or custom made. Going through the extensive spec list of Dennis McClendeon’s ’62 Belair the amount of items made by Dennis and his team is astounding. From the tube frame chassis to the gauges to the windshield, seemingly every other piece of this red and

white rider is bespoke or “scratch built” as Dennis likes to call it. Who knows maybe it’s an AZ thing, which is where Dennis is from and where this story started.

Dennis is an experienced car builder/project coordinator who has built more than a few Chevy’s back to their original state in what he terms “museum quality.” Whether the Smithsonian has any Chevy’s in it is a good question but one thing is for sure, if Dennis can resto-mod a Chevy

like the one you see before you then you can imagine the state of his other classics. In fact when he got this one he originally thought it would be a good restoration project. “I bought this car off of E-bay by accident,” said Dennis. “I had been watching the car for about a month off and on. When it came back on E-bay with a minimum bid of $18,500 I placed the bid on Friday, not even thinking I would get the car at this price.” Dennis packed up his gear and headed out to Bridgetown, MO on Wednesday, paid the tab and had the car back to Mesa, AZ by Friday. Pretty good time if for a cross-country drive but that’s what happens when you’re eager to do to a car what Dennis has done to his. “The car was in great condition with all original sheet metal except for one panel quarter panel. Plus the interior and paint were in good condition.” said Dennis. Once home he called his friend Ryan at Ryan Butler Fabrication with whom he got started plotting the outcome of this stellar Belair’s destiny. “I have restored many of these rare cars,” said Dennis. “But I always wanted to bring one into the 21st Century.”

Dennis did that and brought one lower to the ground than seems humanly possible at the same time. “I wanted the lowest ’62 Chevy in the world,” he said. During the shoot adjacent to a pier in San Diego an astounded passerby asked what the Belair did in the quarter mile. It made us wonder if someone can see a car decked that low and not know it’s for show purposes. I told them it does 8.3 [email protected] and lapped the Nurburgring in 2 minutes 14 seconds and they went on their way none the wiser.

The same planning that goes in to a record-setting drag car went into this Belair though. Steve Stanford did 1/2 dozen renderings including the interior, exterior designs and the graphics before Dennis and he finally came up with a final rendering. As usual the rendering changed again before the car was completed but isn’t that how it always goes? Chevy purists might frown on a ride height that seems intended for nothing else but scraping detritus off the tarmac but you have to admit that when you see a Bubbletop laying frame it warms the cockles. Dennis calls his rig “Showlow.” And it is low. Its on bags and is essentially a low rider. But the lowrider guys don’t like it ‘cuz it doesn’t have 100-spoke D’s.

One of the biggest challenges for Dennis occurred when he and Rich Thayer from R&J customs chopped the top. They chopped it two inches and pushed it back the same distance while also removing the drop rails. As those who have done this before realize, getting the A and C pillars to line up can be like getting Amy Winehouse into rehab. It takes a while but both ladies are more beautiful when they’ve gone through the process. The roof wasn’t the only thing massaged. The bumpers are like Gary Coleman, shortened. Of course they’ve also been filled behind the top of the bumper. On top of that is a hand fabricated lower valance that also serves as a center airfoil. Styling cues are always nice when they are functional as well. The list of “scratch built” items extends into to the hood and under. The hood, both the outer skin and the inner structure is custom as are the motor mounts and the entire floor pan. Not to mention the exhaust the motor mounts and the entire dash. Denny John of D&D specialty installed that and the custom leather that enshrouds the rest of the cabin. The roll cage is discretely hidden there and you wouldn’t even guess that it connects to an entire tube frame chassis. An entire feature could be done on this tube frame chassis.

“This car took 12,000 man hours and two and a half years to build,” said Dennis. Needless to say a lot of those man-hours went into this almost pornographic piece of metal and the ability to have it nearly completely enclosed within the Belair’s body. Although it does peek out at you from the fender if you need proof it’s really in there. Way to go Ryan Butler and crew.

But the cage isn’t in there for show. Like a good porn star, the extra stiffness is there for a reason. The power-form bored and stroked balanced and blueprinted 409 would no doubt bend and break the body of a stock Belair. Of course the bay surrounding the motor and the one off Algon intake manifold is as smooth as the power delivery from this fully built motor.

Air ride technologies bring the ride height down to ridiculous levels over the Colorado Custom wheels. Just like all cars with big motors need to come to come to a halt so do the articles about them. Baer 13-inch brakes do the former while a closing paragraph usually does the latter. With its diabolical stance, massive motor and a cage that could be in the Guggenheim and all of it covered with a Maserati red and Mustang white two tone paint, Dennis has

not only expanded the bubble, he may have burst it. After all, he does kind of look like Gallagher?

_MG_1014 _MG_1020 _MG_1026 2 _MG_1036 2 _MG_1041 2 _MG_1043 2 _MG_1050 _MG_1052 2 _MG_1056 _MG_1059 2 _MG_1060 2 _MG_1061 _MG_1065_2 _MG_1078 2 _MG_1083_2

%d bloggers like this: